Expert Answers about Chevrolet Catalytic Converters
- Recommend Replacement Catalytic Converters For 1996 Ford Explorer
- Depending on which motor your 1996 Ford Explorer is equipped with will depend on how many and which catalytic converters you will need.
If you have the V6 4.0 liter motor, you will need to replace the the front and rear converter. For this we have the MagnaFlow Stainless Steel Catalytic Converter, part # MF23313, (49 state approved) which is a direct fit replacement.
If you have the V8 5.0 liter motor, you will need to replace a total of 4 catalytic converters. For the driver side front,...
view full answer... - Replacement Catalytic Converter For A 1993 Toyota Pickup
- For your 1993 Toyota Pickup, we have the MagnaFlow Stainless Steel Catalytic Converter # MF23886. This catalytic converter utilizes the OEM hangers and mounting flanges, so it will be a direct fit.
It should be noted that this product can not be shipped to California, Colorado, Maine, or New York.
view full answer... - What Catalytic Converter is CARB Compliant for California on My 2000 Ford F-250 with 5.4L V8?
- For your 2000 Ford F-250 with a 5.4L V8 gas engine, the only catalytic converter we carry that is California-compliant is the MagnaFlow Ceramic Catalytic Converter - Stainless Steel - Universal # MF29RP. This converter is CARB compliant.
view full answer... - Recommended Catalytic Converter For A 2003 Lexus GS300 3.0
- Though we do have other catalytic converter that are confirmed for your 2003 Lexus GS300 3.0 The MagnaFlow Stainless Steel Catalytic Converter - Universal # MF91004 is not confirmed to fit.
I recommend The MagnaFlow Stainless Steel Catalytic Converter - Direct-Fit # MF23899. This converter has an easy bolt-on installation and it has a ribbed body that encases the ceramic to reduce expansion and distortion when the converter reaches its high operating. It is made out of a heavy-gauge,...
view full answer... - Catalytic Converters for 2006 Toyota Tacoma Pre-Runner 2WD with 4.0-Liter Engine
- The 2006 Toyota Tacoma Pre-Runner 2WD with 4.0-liter engine has two catalytic converters, a left-hand and right-hand. The MagnaFlow Stainless Steel Direct-Fit Catalytic Converters for this vehicle are parts # MF50848 for the left and # MF50849 for the right.
Both of these are Federal-approved exhaust-manifold-types.
view full answer... - Direct Fit 49 State MagnaFlow Catalytic Converter for 1995 Chevrolet K-1500 Suburban with 5.7 Engine
- According to MagnaFlow the Stainless Steel Catalytic Converter, # MF23256, is the direct fit, 49 state catalytic converter for the 1995 Chevrolet K-1500 Suburban with a 5.7L engine. At this time there is not a California approved direct fit application for your Suburban.
I also checked on a Cat Back exhaust system for your 1995 Suburban and direct fit systems are only available for 1996 and newer K-1500 Suburbans with the 5.7 liter engine.
I added links to a couple of informational articles...
view full answer... - How Many Catalytic Converters Does 2005 Ford Crown Victoria Have
- From what I found in my research, your 2005 Ford Crown Vic will have 4 catalytic converters, two per side. 2 up front just downstream from the exhaust manifolds (which are kind of hard to see) and the 2 more exposed ones at the rear.
The # MF23331 is for the left side, for the right you'd use # MF23332.
view full answer... - Parts Needed for a Complete Bolt On Exhaust System with Cats for a 2001 Chevrolet Suburban
- For a complete bolt on exhaust system, for your 2001 Chevrolet Suburban 2500 4x4 with 6.0 Liter engine, there are no 50 state legal systems available. We do have 49 state legal systems available.
Parts for a 49 State legal vehicle are listed below.
MagnaFlow Stainless Steel Cat-Back Exhaust System, # MF15798
MagnaFlow Direct Fit Stainless Steel Catalytic Converter, # MF93622 (Driver Side)
MagnaFlow Direct Fit Stainless Steel Catalytic Converter, # MF93623 (Passenger Side)
We have an installation...
view full answer... - Replacement Exhaust System for 2004 Accord Sedan with 3.0L V6 Engine
- Exhaust tips are really just cosmetic trim items that provide visual appeal. It sounds more like your entire exhaust/muffler has an issue since the tip alone would not really change how loud the car is.
The MagnaFlow exhaust system # MF15800 you referenced is a complete stainless steel exhaust that does fit the 2004 Accord sedan with 3.0L V6 engine and this would replace your factory exhaust from the outlet of the catalytic converter to the tailpipe. This includes dual mufflers and it...
view full answer...
Go To Results